Index  |  Accessories  |  Economy Machines  |  Counters  |  PCB Depanelers  |  Terminal Machine  |  Pin Machine  |  Hand Tools  |  BGA Reballer  |  Feeders & Special Machines  |  Flat Cable Separator  |  Parts Lists

Accessories 
MOTORS  |  Loose Components Feeders  |  Reel Holders  |  Others

 

MOTORS Motor 98  |  Motor 98/A  |  Motor IC/F  |  AS1

MOTOR 98 The OLAMEF MOT 98 (7915030) is a motor drive unit that attaches to the TP6, TP6/PR-B, TP6/V, TP6/S,  TP6/R manual machines.  This accessory can be purchased separately or as part of the equipment. A foot pedal to control the motor is available (600023). The motors are NECESSARY when planning to use a Loose Component Feeder.    MOT 98 Specs PDF  top

MOTOR 98/A The OLAMEF MOT-98/A (7915032) is a motor drive units that attaches to the following TP6 manually operated machines: TP6/PR-F and TP6/V-PR. This accessory can be purchased separately or as part of the equipment when any model is supplied motorized.  A foot pedal to control the motor is available (600023). The motors are NECESSARY when planning to use a Loose Component Feeder. MOT 98/A Specs PDF  top

MOTOR IC/F The OLAMEF MOT-IC/F is a motor drive units that attaches to the TP/IC-F. This accessory can be purchased separately or as part of the equipment when this model is supplied motorized. The MOT-IC/F comes with a speed control knob to adjust the operation speed.     MOT IC/F Specs PDF top

AS1 The OLAMEF AS1 (95.OL11 for P=12.7mm and 95.OL13 for P=15mm) is an automatic system for the TP/R-PR manual machine. The driving wheel moves step by step stopping the tape during the preforming operation. It can be supplied to adapt to the hole pitches on the component tape: 12.7 mm (.5") and 15 mm (.59")                                                                                        TAPE PITCH                                                                                                                                                                                                               AS1 Specs PDF  top

LOOSE COMPONENTS FEEDERS CS10  |  CS20  |  CS30  |  CS40

CS10 The CS10 (51.0100) is a loose component feeder. This accessory has been designed to feed loose axial components to the following machines: TP6, TP6/PR-B, TP6/S. The motors are NECESSARY when planning to use a loose component feeder.                                                                                                CS10 Specs PDF  top The video below shows the CS10 in operation:

CS20 The CS20 (51.0200) is a loose component feeder. This accessory has been designed to feed loose axial components to the TP6/V-PR machine. The best feeding results and smoother performance is obtained when using the motorized version.   CS20 Specs PDF   top

CS30 The CS30 (51.0300) is a loose component feeder. This accessory has been designed to feed loose axial components to the following machine TP6/V. The motors are NECESSARY when planning to use a loose component feeder.    CS30 Specs PDF top

CS40 The CS40 (51.0400) is a loose component feeder. This accessory has been designed to feed loose axial components to the following machine TP6/PR-F. The motors are NECESSARY when planning to use a loose component feeder. CS40 Specs PDF  top

REEL HOLDERS BR6 |  BR3  |  BR1

BR6     RH-1 The BR6 (400200) is a reel support holder for axial and radial components. This accessory has been designed for the following machines: TP6, TP6/PR-B, TP6/V, TP6/S, TP6/R  and the EC Line.    top

BR3 The BR3 (78.0001 for P=12.7mm and 78.0002 for P=15mm) is a reel holder for taped radial components. This accessory has been designed to attach to the TP/TC4 machine.            TAPE PITCH BR3 Specs PDF  top

BR1 The BR1 is a reel holder for taped radial components for the TP/R-PR and TP/R-PR/AS machines. It is also used with our SP line.                                                                         top

OTHER ACCESSORIES

TNS The TNS helps to pull the waste tape out of the back of the machine after the components have been cut and formed. This attachment mounts easily to any of the machines designed for taped components. Two models are available: -  TNS/11 (21.0011) for TP6, TP6/PR-B, TP6/V, TP6/S, TP6/R -  TNS/13 (21.0013) for TP6/PR-F and TP6/V-PR. The TNS/13 comes already mounted on the TP6/PR-F.  TNS Specs PDF top